PRB COAL USERS’ GROUP at the ELECTRIC POWER 2008

Written by adminDP on May 7, 2008. Posted in Press Releases

prbTim Batton, President of OXISTOP® LLC and John H. Kline, NRG, Huntley Power, LLC, Boiler Tech Services Engineer gave a presentation on “A Technical Paper:
OXISTOP Coatings—For Boiler Tube Maintenance
” at the PRB COAL USERS’ GROUP at the ELECTRIC POWER 2008 Conference. (May 6-8, 2008—Baltimore, Maryland at the Baltimore Convention Center)

08 PRBCUG – Oxistop
5/7/2008 1:00 PM – 2:00 PM
Session Description:
Oxistop coatings have been marketed and installed in the power utility industry since June of 2004. They are a ceramic coating installed directly to the boiler tube, 4-6 mils thick, and in addition to stopping corrosion of the tube fireside surface, provide protection from fly ash and soot blower (in this case, lack of) erosion. The coating enhances heat transfer by preventing iron oxide formation and keeping the tube clean from fuel combustion by-product buildup on the tube as a result of being non-catalytic in nature. The coating has a high emissivity value of .94, greater than the tube itself. Oxistop coatings have proven very affective in minimizing prb coal reflective flyash buildup and pays for itself in a very short period of time by recovering lost power output capacity. John Kline (NRG-Huntley Station) will detail his experiences with the coating materials and through carefull comparison to accurate base line data that will document increased and sustained power output improvement on two twin furnace 192 mw boilers, reduced watercannon activity, substatial lowing of fegt all while burning slightly less prb coal in each application. The initial installation was done in April of 2006, continuing to perform as expected.

 

Session Chairperson Greg Krieser, Plant Manager North Omaha Station – Omaha Public Power District

 

Speakers John Kline, Boiler Tech Services Engineer NRG – Huntley Station

 

Tim Batton, President and Senior Managing Partner Oxistop, LLC

ELECTRIC POWER 2007

Written by adminDP on May 1, 2007. Posted in Press Releases

Tim Batton, President of OXISTOP® LLC, gave a presentation on A Technical Paper:
OXISTOP Coatings—For Boiler Tube Maintenance
 at the ELECTRIC POWER 2007: Where the GenCo’s Meet The Power Industry’s Topical – Informative – Interactive Conference & Exhibition. Conference: Chicago, Illinois (May 1 — 3, 2007)

TECHNICAL CONFERENCE: Impacts of Fuel Quality on Power Production

Written by adminDP on November 1, 2006. Posted in Press Releases

Tim Batton, President of OXISTOP® LLC, gave a presentation on the technical paper OXISTOP Coatings—For Boiler Tube Maintenance at the TECHNICAL CONFERENCE: Impacts of Fuel Quality on Power Production. During October 29 – November 3, 2006 (Snowbird, Utah)

Oxistop's Technical Paper Accepted by Electric Power 2007

Written by adminDP on October 1, 2006. Posted in Press Releases

Tim Batton, President of OXISTOP® LLC, gave a presentation on the technical paper OXISTOP Coatings—For Boiler Tube Maintenance at the EPRI International Conference on Advances in Condition and Remaining Life Assessment for Fossil Power Plants! during October 16 – 18, 2006 (Louisville, Kentucky)

OXISTOP® LLC’s technical paper: A Technical Paper: OXISTOP Coatings—For Boiler Tube Maintenance was accepted for presentation at the ELECTRIC POWER 2007: Where the GenCo’s Meet The Power Industry’s Topical – Informative – Interactive Conference & Exhibition. Tim Batton, President of OXISTOP® LLC, will be giving a presentation on the technical paper at the conference during May 1 — 3, 2007 (Chicago, Illinois)

EPRI Accepts Oxistop Technical Paper

Written by adminDP on August 1, 2006. Posted in Press Releases

OXISTOP® LLC’s technical paper:

A Technical Paper:
OXISTOP Coatings—For Boiler Tube Maintenance

. . .was accepted for presentation at the EPRI International Conference on Advances in Condition and Remaining Life Assessment for Fossil Power Plants! Tim Batton, President of OXISTOP® LLC, will be giving a presentation on the technical paper at the conference during October 16 – 18, 2006 (Louisville, Kentucky)

Click here to see PDF file of the paper

New Oxistop Technology Developments

Written by adminDP on May 1, 2006. Posted in Press Releases

OXISTOP® LLC has recently developed a Bonding System featuring OXISTOP GY-30 Refractory applied to uncured Thermbond Refractory manufactured by Stellar Materials. This technique allows for refractory repairs and an anti-slag coating to be applied in a one step process before heat curing of the refractory and coating. The coating remains completely bonded to the refractory and ready for service. This is an excellent repair plan for burner repairs during outages where eyebrowing of the burners is an issue.

BRIG Presentation Announcement

Written by adminDP on December 14, 2005. Posted in Press Releases

Tim Batton, President of OXISTOP® LLC, will be giving a presentation on ceramic coatings and applications for the EPRI Boiler Reliability Interest Group (BRIG) on December 14th in Atlanta Georgia. Key points will be application process and field performance.

Oxistop to be Featured Speaker at UDC

Written by adminDP on November 1, 2005. Posted in Press Releases

Tim Batton, President and Senior Managing Partner of OXISTOP® LLC will be a featured speaker at the United Dynamics Corporation (UDC) 11th Annual User’s Conference. Conference will be in Key West, Florida during January 10-12. Tim will be discussing the use and benefits of ceramic coatings in the power utility industry.

AEP BRO FORUM Presentation Announcement

Written by adminDP on August 30, 2005. Posted in Press Releases

OXISTOP® has made on August 30, 2005 a formal presentation at the AEP BRO FORUM regarding our products and power industry applications. In attendance were over 300 individuals representing AEP, TVA, DP & L, DYENGY, CINERGY,and SOUTHERN Companies.

Presentation Announcement

Written by adminDP on August 17, 2005. Posted in Press Releases

OXISTOP® has made a formal presentation to FIRST ENERGY’S SEMC ENGINEERING GROUP on August 17, 2005 in Stow, Ohio. Included were plant personnel and managers.

Vision/Mission

To be the world's leading innovator in energy enhancement and conservation technologies, by providing solutions resulting in industrial and economical benefits to our customers and the environment. We are committed to satisfying our customers, developing quality relationships with our business partners and supporting the family values of our employees.